Professional Speakers and Headphones Burn In and Break in Track



Check out my new drone channel with amazing videos!

———————————————————————————————————–
The Headphone in the Photo: OPPO PM-1
The Speakers on the Photo: Audioengine P4
Burn – In Explanation – IMPORTANT TO READ – Click on Show More
———————————————————————————————————–
Burn in is the process for exercising new audio equipment. Most headphones require at least 40 hours of burn-in time to reach their optimal performing state. The main purpose of the burn-in process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Most audiophiles agree that the sound quality will be noticeably improved after burn-in.

Remember: not all speakers will sound dramatically different after break-in. Some improve only marginally, some might not change at all while others can change in a drastic way.

How do I do it?
————————-
There are different ways to burn-in your headphones (or earbuds). The most common ways include running a variety of music, white noise, pink noise, radio noise, frequency sweeps, etc. through the headphones at a medium volume. Note: too high of a volume can cause damage to, or even kill your headphones!

There are no statistics stating which method works best. Music is an obvious burn-in candidate and works quite well if you have a broad range of musical genres in your playlist. Playing only one type of music however will not exercise and stress the entire audio spectrum.

How long should I do it?
—————————————-
The general rule is about 40 hours. Some people burn-in their headphones quickly playing them 40 hours continuously after bringing them home. This may not be good because, the diaphragm may be too weak at this time and should not be pushed to the limit. The best thing to do may be to plug your headphones into your computer or mp3 player, set the volume to medium, and let your music play for up to 4-5 hours a day for 5 days (perhaps, while you are at work or sleeping). After that, your headphones will most likely sound their best. Note: you do not need to listen the whole time. Use it at your own risk!

Directions for use
——————————
Please connect your headphones to your computer, remove them from your ears, turn the volume to mid-level (medium), press play on the player below, and let it play for the desired time.
Do not listen to your headphones while the burn-in file is playing!
The audio burn in file contains a nonstop loop of: White noise, pink noise, radio white noise, 20-20000 Hz frequency sweeps, 10-30000 Hz frequency sweeps, 20-200 Hz frequency sweeps, as well as a minute of silence in between each for a rest period.

If you want to Burn-In your LCD or fix a dead pixel click here:

Burn-In (או הרצה) הוא התהליך של “ריכוך” ציוד אודיו חדש. למשל, מרבית האוזניות יצטרכו לפחות 40 שעות של הרצה כדי שיגיעו למצב האופטימלי שלהם. המטרה העיקרית של תהליך הצריבה היא לשחרר את הדיאפרגמה של אוזניות חדשות וכדי ללחוץ יותר את הרמקול עצמו. רוב האודיופילים מסכימים כי ירגישו שיפור לאחר ההרצה, אך במבחן המציאות ישנם אוזניות שאנו נרגיש הבדל גדול אך קיימות אוזניות שלא נרגיש בהבדל כלל.

אז איך מבצעים Burn-In?
ישנן מספר דרכים כדי להריץ אוזניות (או רמקולים). הדרכים הנפוצות ביותר כוללות להפעיל מגוון של תדרים בעוצמה (ווליום) בינונית כגון מוסיקה, רעש לבן, רעש ורוד, רעש רדיו וכו’. אין סטטיסטיקות אשר קובעות איזו שיטה עובדת הכי טוב. מוסיקה היא אמצעי נוח ובטוח אשר עובד היטב אם יש לכם מגוון רחב של ז’אנרים מוזיקליים ברשימת ההשמעה שלכם. השמעה של סוג אחד של מוסיקה לא תהיה יעילה מכיוון שהיא לא כוללת מגוון רחב של ספקטרום השמע. הערה חשובה: ווליום גבוה מדי יכול לגרום נזק, או אפילו להרוס את האוזניות! אז אנא אל תגזימו.

כמה זמן עלי להריץ את ה-Burn-In?
הכלל הוא כ -40 שעות. ישנם אנשים אשר קונים אוזניות ומריצים אותם מיד 40 שעות רצופות. זו לא שיטה מומלצת כי הדיאפרגמה יכולה להיות חלשה מדי בשלב זה ולא כדאי לדחוף אותה עד קצה גבול היכולת. הדבר הטוב ביותר לעשות הוא לחבר את אוזניות לתוך המחשב או לנגן ה-MP3 שלכם, להגדיר את העוצמה לבינונית ולהריץ את האוזניות 4 עד 5 שעות ביום במשך 5 ימים. לאחר מכן, האוזניות שלכם ככל הנראה ישמעו במיטבם.

הוראות שימוש
חברו את האוזניות למחשב (או לאמצעי שמע אחר), הנמיכו את הווליום עד לרמה בינונית, הסירו אותם מן האוזניים, ליחצו על הסרטון ותנו לו לנגן ברצף. אל תקשיבו לאוזניות כשהסרטון מתנגן! הקובץ אודיו מכיל לולאה של: רעש לבן, רעש ורוד, רעש רדיו לבן, תדרים של 20-20000 הרץ, 10-30000 הרץ, 20-200 הרץ ומספר דקות שקטות בין כל לולאה. הערה: המבחן הוא על אחריותכם בלבד.

אם חיפשת וידאו להרצה של LCD לחץ כאן:

עקבו אחרינו:
פייסבוק –
טוויטר –
גוגל פלוס –

Nguồn: https://dienthoaivinsmart.com

Xem thêm bài viết khác: https://dienthoaivinsmart.com/phu-kien

  • If the video helped you please SUBSCRIBE to support us 🙂

    TechTip April 26, 2020 10:30 am Reply
  • This is now my go-to video whenever I get new headphones 🙂 thanks!

    Constipated Llama April 26, 2020 10:30 am Reply
  • I got ejected from my seat at 6:06

    Intrinsically Foreign April 26, 2020 10:30 am Reply
  • My ears finally hear so much better now thanks

    Siddhart Singh April 26, 2020 10:30 am Reply
  • Hello I have my Sennheiser CX 275s, at what volume level should i keep this and what no. Of hours can be a routine for my earphones. ??

    KUSHAL THAPA April 26, 2020 10:30 am Reply
  • made my iphone break

    อาร์ตไลฟ์ ชาเนล April 26, 2020 10:30 am Reply
  • My bass in my speakers sound wired! Try this at you risk!

    InfinitySpartex April 26, 2020 10:30 am Reply
  • trying on my 1630s watch

    Ethan Kingles April 26, 2020 10:30 am Reply
  • im trying to break my school headphones for 1$

    Ludvig Haugeby 9B Hagaskolan April 26, 2020 10:30 am Reply
  • A good one: https://www.br8kin.com/en/home/

    Marc HENRY April 26, 2020 10:30 am Reply
  • Trying to improve my phone speakers

    speedplays April 26, 2020 10:30 am Reply
  • 💕👍🇫🇷

    konrad herrmann April 26, 2020 10:30 am Reply
  • Does it work on a Apple iPhone 7 Plus loud speaker at 100% volume

    T Jones April 26, 2020 10:30 am Reply
  • and its a trick lol get exposes get nubed you get them llllllllllllllllllllllllllllllllllllllllllllllllllllllllllll bad vid ok

    pearce mclaughlin April 26, 2020 10:30 am Reply
  • wont kill my speekers at fole voaleome

    pearce mclaughlin April 26, 2020 10:30 am Reply
  • Should I keep hear it on my ears or just could left my headset and keep playing the audio? or what?

    Btw, I'm using headset ~

    M. Faiq W. April 26, 2020 10:30 am Reply
  • Karınca pornosu

    Taha Çelik April 26, 2020 10:30 am Reply
  • 1:44:51 i thought my phone speaker broke

    aids April 26, 2020 10:30 am Reply
  • Is that 40 hours consecutive OR can I use this before bed and let it run ID really like to use them

    fung whyou April 26, 2020 10:30 am Reply
  • Trying to improve the samsung headphones that came with my new phone. Barely any bass

    Misho Pruidze April 26, 2020 10:30 am Reply
  • I know you said to have your headphones at half volume but I had my headphones at max volume does it work better too have theme at max volume

    T Jones April 26, 2020 10:30 am Reply
  • Thank you it made my new cheap crappy sounding $5 headphones sound good now they sound like high-quality headphones permanently instead of cheap crappy sounding ones thank you

    T Jones April 26, 2020 10:30 am Reply
  • Will speaker cables also benefit from playing this? I know cables also need some time to become their best sounding, so this may help I guess.

    Bill MacKinnon April 26, 2020 10:30 am Reply
  • After 30 minutes my 2 euro headphone is still alive :/

    VilppaZZ April 26, 2020 10:30 am Reply
  • Just so people know, this would be helpful if the speakers go cold and takes milliseconds or seconds to warm and sound!!

    Avinash Prabhakar April 26, 2020 10:30 am Reply
  • Burning in Klipsch R6 Version I's anyone?

    M1GarandMan3005 April 26, 2020 10:30 am Reply
  • Does it work with iPad Pro speakers?

    Philip Chan April 26, 2020 10:30 am Reply
  • Will this work on my new coffee maker?

    Adam April 26, 2020 10:30 am Reply
  • Wow what is up with the 6 year pause into between noises? I mean really.

    Paul Horn April 26, 2020 10:30 am Reply
  • it will probably work if you have studio grade headphones,i don't know about cheap ones,but in high quality gear you can tell the difference if you have sensitive hearing.I got the DT 990 pros which have razor sharp highs and this thing here tamed them down.I could barely play my games before,like after some hour I was getting ear fatigue and wanted to take them off.Now i can play for hours no problem because the highs are more ''mellow''.And I imagine I used this video once.I still need to do some more burning in I dont even think i have 40 hours of use already.So yeah if you have problems with sharp highs try this it will probably help.

    Pavlos Ge April 26, 2020 10:30 am Reply
  • can i skip the pauses or is that necassary

    Malek Agha April 26, 2020 10:30 am Reply
  • if i play it louder will it burn faster?

    Malek Agha April 26, 2020 10:30 am Reply
  • Thank you TechTip…subscribed!!!

    Al Locke April 26, 2020 10:30 am Reply
  • will this work on my ipad?

    WIZARDIRL April 26, 2020 10:30 am Reply
  • should the volume be max?

    Anthony Steele April 26, 2020 10:30 am Reply
  • This is great, can’t believe the artist dropped a two cd set right out of the gate

    ryan rhoads April 26, 2020 10:30 am Reply
  • Ads In Video.
    No burin in Speaker. FK you

    Relaxing Storm April 26, 2020 10:30 am Reply
  • The static was coming from my headphone jack…?

    ItzOn Gaming April 26, 2020 10:30 am Reply
  • Hey dudes, Its first time I hear about burning in. I dont know if it works or not, but I am certain the sound changes after like 2 weeks of earphone use. I recently bought (earbuds) Brainwavz Jive, at first they were ok, I heard some bass, then after 2 hours all bass and clarity just went missing. The volume was somewhat inconsistant too – is this possible?

    Žiga Klun April 26, 2020 10:30 am Reply
  • I'm burning in my hd 700. I used to own a used 5 year old Sennheiser hd 700 (sold it about 5 months ago) and I thought it sounded better than a brand new hd 700. From memories the used hd 700 I owned had more clarity and dynamic. I've heard that the hd 700 require 400 hours of burn in according to amazon reviewers so should I play this all week? Btw why is there a long pause between the sounds tests

    Henry April 26, 2020 10:30 am Reply
  • I know it's an old video, but those are not the PM-3 in the link. Those are the PM-1 headphones.

    x Army Firedawg x April 26, 2020 10:30 am Reply
  • Will this work on my wife?

    Chris G April 26, 2020 10:30 am Reply
  • Trying on my steelseries arctis 3

    freakinfrost April 26, 2020 10:30 am Reply
  • Does this works well with Bowers and Wilkins PX?

    Sarky Ho April 26, 2020 10:30 am Reply
  • So I go through earphones like bottles of water. I wear them for at least 10 hours per day and so like most things they break after about 2-3 months of use no matter how cheap or expensive they either get broken connections (door handles 😂), just wear out and die in one ear from over use or earwax. So I bought another new pair of earphones yesterday and they were cheap ones (most I’ve spent is like $200) these ones were about $15. I couldn’t hear most of the lyrics of the songs of the drums even changing the sound settings on Spotify. 30 mins of this video and wow! I can hear the difference. Definitely going to have this video run overnight

    Mark Moffatt April 26, 2020 10:30 am Reply
  • You must have such a high watch time for this video 😂😂

    What’s the average?

    Mark Moffatt April 26, 2020 10:30 am Reply
  • Good

    นายแต้ ปารา April 26, 2020 10:30 am Reply
  • If anyone really thinks that breaking in speaker really does anything you might come to the realization that there really is not way to test this if it did. To think that breakin in a speak does anything takes a level of stupid that is hard to imagine. Good luck guys

    Phil Barry April 26, 2020 10:30 am Reply
  • does this work on apple earpods.???????

    Ralph Canlas April 26, 2020 10:30 am Reply
  • if i play the video at x2 speed will it burn in x2 faster?

    Bao Pham April 26, 2020 10:30 am Reply

Leave a Reply

Your email address will not be published. Required fields are marked *